BREAKAWAY SYSTEMS & ACCESSORIES
  www.cerka.ca
Click to find out about pricing

Sorry we do NOT ship outside of Canada

 

 

  Most Prov./States require breakaway switch with separate power supply when towing a trailer over 3000 lbs..

 

TAP ENGAGER Break-Away Kit

View Installation Manual
  • rechargeable 12V battery 
  • rustproof
  • plastic battery case
  • LED test light 
  • breakaway switch 
Part No. Description

74-20100

 TAP ENGAGER Break-Away Kit For use on single- and tandem-axle trailers with electric brakes.

Tekonsha Breakaway System

View Installation Manual
  • Push to test: LED's indicate fully charged, charging or (needs) charge
  • Activates trailer brakes upon separation from tow vehicle
  • Integrated multi-stage charger provides a fast recharge to maximum voltage
  • For use on 1, 2 or 3 axle trailers equipped with electric brakes
  • Weather/corrosion resistant, heavy-duty polymer case to protect battery and charger
  • Quick and easy to install 
Part No. Description

74-5085313

 Tekonsha Push to test LED Lite w/charger up to 3 axles. 5 amp/hr battery.

breakaway kit

SHUR-SET III BREAKAWAY KITS mount on jackpost or A-frame.  Quick, easy one bolt installation.  Weather/Corrosion resistant.  

View Installation Manual

  
Part No. Description

74-1028

 Shur Set III® Breakaway Kit  FOR USE ON SINGLE AND TANDEM TRAILERS EQUIPPED WITH ELECTRIC BRAKES.    
Click for Wiring Harness Integration

Kit

 74-2018 Polymer Battery Case with A-Frame or Post Mounting Bracket
74-1023 Rechargeable Sealed 12v 4-Amp/hr Lead Acid Battery and Terminals
74-1024 DC-to-DC Accelerated Battery Charging Device (ABCD)
74-2005 Nylon Breakaway Switch

74-2028

 Same as above but includes TRI-AXLE* TRAILERS.  (*Tri-Axle trailers require minimum 5-Amp/hr battery.) and two stage charger.
Click for Wiring Harness Integration

Kit

 

 74-2018 Polymer Battery Case with A-Frame or Post Mounting Bracket
74-2023 Rechargeable Sealed 12v 5-Amp/hr Lead Acid Battery and Terminals
74-2024 DC-to-DC Heavy Duty Quick / Maintenance (Two Stage) Battery Charger
74-2010 Nylon Breakaway Switch

 

Lead Acid Battery

Battery

  

12v, 5-Amp/hour sealed lead acid battery for use with Shur Set III Breakaway Systems on single, tandem and tri-axle* trailers equipped with electric brakes. (* Tri-Axle trailers require 5-Amp/hour battery.) Battery requires periodic recharging to maintain optimum performance.
Part No. Description

74-2023

 5 Amp/hour Sealed Lead Acid Battery

Battery Charger

Battery charger

 Designed to fit securely into the Shur Set IIITM Breakaway Battery Cases. Patented temperature compensated design provides continuous recharge for all 12v battery systems with 4-amp (minimum) output. Provides maintenance-free assurance that breakaway batteries are always fully charged. Automatic shut-off feature will not permit battery to overcharge.
Part No. Description

74-2024

 DC-to-DC Heavy Duty Quick / Maintenance (Two Stage) Charger

 

Breakaway Switch

breakaway switch
View Installation Manual
  • Reinforced nylon case. 
  • Weldable metal tab and coated 48" lanyard. 
  • Rust and corrosion-free assures long life. 
  • Silver contact points remain corrosion-free for positive contact. 
  • Nylon pull pin can't freeze up — assures positive actuation.
Part No. Description

74-2010

 Breakaway Switch

74-2010-A

 48" Replacement Cable & Nylon Pin Assembly.  * Use on switch 2010

74-20005

 Breakaway Switch Hoppy

Pulse Preventer

pulse preventer
View Installation Manual
Part No. Description

74-2180-S

 Pulse Preventer. Prevents actuation of electronic brake control by 4-way flasher circuit.