BOAT TRAILER BRACKETS
| RIBBED ROLLER ASSEMBLY |
 |
| Designed with lightweight 1 1/8" Aluminum bar and pivot plate. |
|
|
|
| BOLSTER SUPPORT SWIVEL BRACKETS
|
|
|
Bolster bracket and angle bracket assembly designed to support horizontal
2" x 6" bolster or bunk boards. Slotted for vertical
adjustment to properly support stepped down boat hulls. Non-slip notches
prevent movement of horizontal boards whole increasing load capacity.
Made of 11 gauge zinc plated steel (7/16" diameter bolt and nut
is not included).
|
| Part No. |
Description |
|
80-10100
|
8" with Angle Bolster
Support Bracket |
|
80-10100Z
|
8" with Angle Bolster
Support Bracket Zinc (80-10201Z included) |
|
80-10101
|
10" with Angle Bolster
Support Bracket |
|
80-10101Z
|
10" with Angle Bolster
Support Bracket Zinc (80-10201Z included) |
|
80-10102
|
12" with Angle Bolster
Support Bracket |
|
80-10102Z
|
12" with Angle Bolster
Support Bracket Zinc (80-10201Z included) |
|
80-10201Z
|
Swivel Bracket for Bolster
Support Brackets |
|
|
|
PANEL BRACKETS
|
|
|
Brackets are one piece, heavy duty zinc-plated 11 gauge steel,
specifically designed to support keel rollers. Slot accept
7/16" or 1/2" diameter bolts and provide vertical roller
adjustment. Non-slip notches hold bracket and roller securely in
place. For 1/2" or 5/8" diameter roller shafts.
|
| Part No. |
Description |
|
80-10300Z
|
4" Panel Bracket, 5/8" Shaft Diameter Zinc |
|
80-10301Z
|
5" Panel Bracket, 5/8" Shaft Diameter Zinc |
|
80-10303Z |
8" Panel Bracket, 5/8" Shaft Diameter Zinc |
|
80-10304Z |
10" Panel Bracket, 5/8" Shaft Diameter Zinc |
|
80-10305Z |
12" Panel Bracket, 5/8" Shaft Diameter Zinc |
|
|
|
PANEL BRACKET ASSEMBLY
|
|
|
| Part No. |
Description |
|
80-BA1178 |
4" Keel Roller & Panel Bracket Assembly
|
|
80-BA1219 |
5" Keel Roller & Panel Bracket Assembly
|
|
80-BA31058P |
8" Keel Roller & Panel Bracket Assembly
|
|
80-BA31170P |
10" Keel Roller & Panel Bracket Assembly
|
|
80-BA1258P |
12" Keel Roller & Panel Bracket Assembly
|
|
|
|
SPLIT PANEL BRACKETS
|
|
|
Manufactured in pairs (right and left) to accommodate any size roller
length. Slot allows vertical adjustment for stabilizing boat on
trailer. Made of 11 gauge steel and zinc-plated. Slots accept
7/16" or 1/2" diameter bolt. Use 1/2" or 5/8"
diameter roller shaft.
|
| Part No. |
Description |
|
80-10500Z
|
2 piece Bracket fits 5" - 18" Roller
|
|
|
|
BUNK BRACKETS
|
|
|
Slotted to easily mount 2 x 4's for boat hull height adjustment.
Slot accepts 7/16" diameter bolt. Made of 11 gauge steel and
zinc-plated for long life. Available in two sizes.
|
| Part No. |
Description |
|
80-10600Z
|
9 1/2 " (Long vertical
bunk) Bracket Galvanized |
|
80-10601Z |
12 5/8" Long (Vertical
Bunk) Bracket Zinc |
|
|
|
|
PONTOON BUNK BRACKETS
|
|
|
| Part No. |
Description |
|
80-44012
|
11
gauge steel hot dipped galvanized. 8.38" wide bottom x
15.68" wide top x 4.70" tall |
|
|
|
|
KEEL ROLLER BRACKETS
|
|
|
Adjustable offset brackets mount on tongue to hold roller for keel
support. Made of heavy 3/16" x 1 1/2" bar stock.
Offset is 1". Length is 11 1/2". Mount with
3/8" diameter bolts. Use 1/2" or 5/8" diameter shaft
for roller.
|
| Part No. |
Description |
| 80-TBG2 |
3" Keel / Bow Roller & 2 piece bracket assembly
for 2" tongue
|
| 80-TBG3 |
4" Keel / Bow Roller & 2 piece bracket assembly
for 3" tongue
|
| 80-TBG |
Galv. Tongue Roller bracket only for
3" or 4" rollers (pair needed/roller not included.)
|
|
|
|
PAL NUTS
|
|
|
Pal Nuts: Attach to end of shaft to retain roller within
bracket.
|
| Part No. |
Description |
|
80-N107 |
Pal Nuts for 1/2" Shaft, zinc plated
|
|
80-N108 |
Pal Nuts for 5/8" Shaft, zinc plated
|
|
|
|
ROLLER SHAFTS
|
|
|
| Part No. |
Description |
|
80-S12*5 |
Shaft 1/2 x 5.25 for 4" roller
|
|
80-S12*6 |
Shaft 1/2 x 6.25 for 5" roller
|
|
80-S58*9 |
Shaft 5/8 x 9.25 for 8" roller
|
|
80-S58*11 |
Shaft 5/8 x 11.25 for 10" roller
|
|
80-S58*13 |
Shaft 5/8 x 13.25 for 12" roller
|
|
|
There are no products to list in this category.
