#12V Torflex 7200 lb Axle

#12V Torflex 7200 lb Axle


#12V OVERHANG PER SIDE
Spindle Min. Max.
Standard 7.00" 14.77"

Note: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket.

SPECIFICATIONS


  Spindles:       Straight, 25580 Inner / 02475 Outer bearings
  Lubrication:   Grease or EZ-Lube
   Hubs:  8 Stud on 6.5”  (9/16” studs) (see Hub page)

BRAKES


  Electric 12 1/4" x 2 1/2" Cast backing plate  (see Electric Brake page)
  Hydraulic (NOT available)

OPTIONS


  Lubrication:    Nev-R-Lube or Oil bath
  Hubs:  Optional 5/8" Studs
  Wire: Pre-wire, Braided wire 
  Hardware: A/P-168

SUSPENSION


  • Totally rubber-cushioned for smooth, quiet, independent ride.
  • Easy installation with less maintenance.
  • Less transfer of road shock which insulates cargo from road shocks and vibration.
  • Rubber cords compounded for maximum dependability and durability.
  • Load carrying cross member.
  • Self-damping action.
  • Independent wheel suspension.
  • 5 year limited warranty on suspension system.
  • Low profile for maximum road clearance.
  • Various starting angles to control trailer height.
  • High and low profile brackets with optional mounting brackets available.
  • Single or Tandem axle assemblies. 
  • CAUTION: Triple axle assemblies NOT recommended

#12V BRACKET DIMENSIONS


#12V BRACKET DIMENSIONS
  Low High
A 1.25 1.25
B 3.50 3.50
C 9.50 9.50
D 9.00 9.00
E 12.00 12.00
F 4.37 5.12
G 2.50 2.50
J 2.06 2.06
N --- 1.03
P --- 1.00
Q --- 1.00
Bolt Size 5/8" Bolt
Tube Size 3.50 3.50


#12V ARTICULATION DIMENSIONS


Dimensions are for low profile, top mount only. Side mount is .31" higher. Allow 3" bump clearance from full load.

  No Load Full Load Shock Load
Start
Angle
Bracket Profile H L H L H L
45° down Low 6.24 4.24 4.30 5.54 3.30 5.86
High 6.99 4.24 5.05 5.54 4.05 5.86
22.5° down Low 4.30 5.54 2.0 6.00 0.96 5.91
High 5.05 5.54 2.75 6.00 1.71 5.91
10° down Low 3.04 5.91 0.70 5.86 -0.30 5.54
High 3.79 5.91 1.45 5.86 0.45 5.54
Low 2.00 6.00 -0.30 5.54 -1.22 5.06
High 2.75 6.00 0.45 5.54 -0.47 5.06
10° up Low 0.96 5.91 -1.22 5.06 -2.05 4.42
High 1.71 5.91 -0.47 5.06 -1.30 4.42
22.5° up Low -0.30 5.54 -2.24 4.24 -2.91 3.44
High 0.45 5.54 -1.49 4.24 -2.16 3.44

12V FULL LOAD DIMENSIONS


Dimensions are for low profile, top mount only. High profile brackets are .75" higher. Side mount is .31" higher. Allow 3" bump clearance from full load.
Start Angle 45° Down 22.5° Down 10° Down 10° Up 22.5° Up  
Tire H B C H B C H B C H B C H B C H B C D E
LT235/85R16 4.3 18.6 11.1 2.0 16.3 13.4 0.7 15.0 14.7 -0.3 14.0 15.7 -1.2 13.1 16.6 -2.2 12.1 17.6 14.3 15.4
7.50-16LT 4.3 19.2 12.4 2.0 16.9 14.7 0.7 15.6 16.0 -0.3 14.6 17.0 -1.2 13.7 17.9 -2.2 12.7 18.9 14.9 16.7
9.50-16.5LT 4.3 18.4 10.9 2.0 16.1 13.2 0.7 14.8 14.5 -0.3 13.8 15.5 -1.2 12.9 16.4 -2.2 11.9 17.4 14.1 15.2

There are no products to list in this category.