#8 TORFLEX 600-1100 lb Axle

 #8 TORFLEX 600-1100 lb Axle

SPECIFICATIONS

  Spindles: Straight, L44649 Inner/Outerbearing
  Lubrication:   Grease or EZ-Lube 
  Hubs: 5 Stud on 4.5" with 5.5" Hub Flange - for 8" - 12" Wheels (see Hub page)


BRAKES

  Electric 7" x 1 1/4"  (see Electric Brake page)
  Hydraulic 7" x 1 3/4" Uni-Servo non free backing (see Hydraulic Brake page)

OPTIONS


  Hubs: 4 Stud on 4" 
             5 Stud on 4.5" with 6.5" Hub Flange - for 12" - 15" Wheels
  Hardware: A/P-165

#8 OVERHANG PER SIDE
Spindle Min. Max.
Short 4.75" 9.04"
Standard 6.00" 9.04"

SUSPENSION

  • Totally rubber-cushioned for smooth, quiet, independent ride.
  • Easy installation with less maintenance.
  • Less transfer of road shock which insulates cargo from road shocks and vibration.
  • Rubber cords compounded for maximum dependability and durability.
  • Load carrying cross member.
  • Self-damping action.
  • Independent wheel suspension.
  • 5 year limited warranty on suspension system.
  • Low profile for maximum road clearance.
  • Various starting angles to control trailer height.
  • High and low profile brackets with optional mounting brackets available.
  • Single or Tandem axle assemblies. 
  • CAUTION: Triple axle assemblies NOT recommended

#8 BRACKET DIMENSIONS

#8 BRACKET DIMENSIONS  
  Low
A 1.00
B 2.38
C 8.00
D 7.75
E 10.00
F 2.88
G 2.00
J 1.57
Bolt Size 1/2" Bolt
Tube Size 1.75

#8 ARTICULATION DIMENSIONS

Dimensions are for low profile, top mount only. Side mount is .18" higher. Allow 3" bump clearance from full load.
  No Load Full Load Shock Load
Start
Angle
Bracket
Profile
H L H L H L
45° down Low 3.84 2.83 2.54 3.70 1.87 3.91
22.5° down Low 2.54 3.70 1.01 4.00 0.31 3.94
10° down Low 1.70 3.94 0.14 3.91 -0.52 3.70
Low 1.01 4.00 -0.52 3.70 -1.14 3.37
10° up Low 0.31 3.94 -1.14 3.37 -1.69 2.95
22.5° up Low -0.52 3.70 -1.82 2.83 -2.27 2.29
Note: Positive numbers in the H column indicate the spindle is BELOW the top of the bracket. Conversely, negative numbers are ABOVE the top of the bracket

#8 FULL LOAD DIMENSIONS
Dimensions are for low profile, top mount only.  Side mount is .18" higher. Allow 3" bump clearance from full load.

Start Angle 45° Down 22.5° Down 10° Down 10° Up 22.5° Up  
Tire H B C H B C H B C H B C H B C H B C D E
ST175/80R13 2.5 13.7 9.5 1.0 12.2 11.0 0.1 11.3 11.9 -0.5 10.7 12.5 -1.1 10.1 13.1 -1.8 9.4 13.8 11.2 12.0
4.80-8 2.5 10.4 6.3 1.0 8.9 7.8 0.1 8.0 8.7 -0.5 7.4 9.3 -1.1 6.8 9.9 -1.8 6.1 10.6 7.9 8.8
4.80-12 2.5 12.0 8.3 1.0 10.5 9.8 0.1 9.6 10.7 -0.5 9.0 11.3 -1.1 8.4 11.9 -1.8 7.7 12.6 9.5 10.8
20.5x8.0-10 2.5 12.2 8.3 1.0 10.7 9.8 0.1 9.8 10.7 -0.5 9.2 11.3 -1.1 8.6 11.9 -1.8 7.9 12.6 9.7 10.8

There are no products to list in this category.