1000-2200 lb Axle

1000-2200 lb Axle

OPTIONS


Brake Flanges on beam & beam with idler hubs
Spring length & capacity
Pre-wired or Pre-wired sealed harness

SPECIFICATIONS


  Axle Tube:    .150 Wall Thickness x 1.9" OD Round Tube
  Spindles:       Straight only, 1 1/16" Bearing, 1" on request
  Hardware:      U-bolts, Tie Plates and fasteners included with beam
  Lubrication:   E-Z Lube option

HUBS


  Idler 4 stud on 4.0" bolt center (see Hub page)
  Idler 5 stud on 4.5" bolt center (see Hub page)
 7" Hub & Drum 5 stud on 4.5" bolt center  (see Hub page)

BRAKES


  Electric 7" x 1.25"  (see Electric Brake page)
  Hydraulic 7" x 1.75" uni-servo (see Hydraulic Brake page)

SUSPENSION

Springs

Leaf Capacity Each Type Length Width Standard/ Option

Bushing

31-125-3 1000 lb. D.E. 23.13" 1.75" Standard 9/16"
31-125-4 1500 lb. D.E. 23.13" 1.75" Optional 9/16"
31-BT25-6 500 lb. Slipper 25.0" 1.75" Optional 9/16"
31-BT25-9 950 lb. Slipper 25.0" 1.75" Standard 9/16"
31-BT25-12 1300 lb. Slipper 25.0" 1.75" Optional 9/16"

Suspension Hardware
No. of Axles Capacity Type Width
30-20SASLKIT Single 2000 lb.  Slipper 1.75"
30-20SADEKIT Single 2000 lb. Double Eye 1.75"
30-35TADEKIT Tandem 2-7000 lb.  Double Eye 1.75"
30-35TRDEKIT Triple 2-7000 lb.  Double Eye 1.75"


HUB FACE AND SPRING CENTER MEASUREMENTS


DIFFERENCE BETWEEN HUB FACE AND SPRING CENTER or (E x2)

Axle Type Minimum
Recommended Maximum
Straight
7.62
11" 15.25"
Drop
9
13" 18"

 Note: Maximum Spring Centers may vary with rim size.

Minimums are based on manufacturing tolerances, some wheel and tire combinations may not work.

Maximum capacity- actual capacity may vary depending on springs, options and overhangs.


There are no products to list in this category.