8000 lb Hubs

STANDARD LUBE PARTS

Item

Part No.

Description
1 57-10-63 Oil Seal Unitized 2.25 ID,  3.376 OD
2 58-25580 Inner Bearing Cone
3 58-25520 Inner Bearing Cup
4 58-02420 Outer Bearing Cup - For item 24 & 27
5 58-02475 Outer Bearing Cone - For item 24 & 27
6 59-006-176-00 Spindle Nut
7 59-CP18*2 Cotter Pin
8A 55-21-43-1 7000 lb. Dust Cap EZ-Lube
8B 55-85-1 EZ-Lube Plug
8C 55-21-35 Oil Cap
8D 55-46-32 Oil Cap Plug
9 59-FW3500 Spindle Washer
14 55-046-052-00 Rubber Oil Filler Plug
16 55-10-45 Oil Bath "O" Ring
28 59-006-191-00 Special Jam Nut
29 59-006-190-00 Spindle Nut Retainer
NS 55-21-39 Grease Cap
 

BRAKES

Item Part No. Description
20 74-023-434-00 LH 12.25" x 3.375" Electric (Cast Backing Plate)
20 74-023-435-00 RH 12.25" x 3.375" Electric (Cast Backing Plate)
20 74-23-097 LH 12.25" x 3.375" Electric (Stamped Backing Plate)
20 74-23-098 RH 12.25" x 3.375" Electric (Stamped Backing Plate)
NS 71-23-402 LH 12.25" x 3.375" Duo-Servo Self Adjusting Hydraulic
NS 71-23-403 RH 12.25" x 3.375" Duo-Servo Self Adjusting Hydraulic
ABS Components
NS 097-004-00 Sensor, Straight
NS 024-204-00 Sensor Block, Screw-in
NS 097-002-00 Sensor Retainer Clip

 

HUBS

Item Part No. Description Bolt Circle
Hubs and Drums
24 54-8-285-08 12.25" H-D Grease 5/8" Studs 8 on 6.5"
24 54-8-285-09 12.25" H-D Oil 9/16" Studs 8 on 6.5"
24 54-8-285-10 12.25" H-D Oil 5/8" Studs 8 on 6.5"
24 54-8-285-11 12.25" H-D Grease 9/16" Studs 8 on 6.5"
Idler Hubs
NS 54-8-287-14 Idler Oil 9/16" Studs 8 on 6.5"
NS 54-8-287-17 Idler Oil 5/8" Studs 8 on 6.5"

There are no products to list in this category.